Mechanical Features of This Series:

• The x and y-axis routine utilizes the direction of the machine head so the work tank is not limited to the weight of the work piece for lasting performance stability.
• The X. Y. Z. axis Utilizes imported servo motor and high precision linear bearing V -guidway and ball screw to enable consecutive sparking and cutting speed under the best conditions.
• The machine head is complete sealed to provide dust resistance, prolonged service life and consistent precision.
• Machine head servo utilizes a special bearing design for stability, zero interval and load rate twice as high as conventional units.
• Dielectric fluid nozzles built in machine head the efficiently removes debris, saves time and is convenient.
• It can be settled with "Balance equipment" for extending maximum electrode weight, protecting the machine head and creating better sensitivity machine head servo.

Basic Functions:

• Innovatively equipped with three types of safety devices, has an infrared fire monitor, oil temperature monitor, automatic fire extinguisher and many other safety design features.
• Has an automatic sparking off time adjustment to prevent carbon accumulation and electrode wear.
• Sparking gap control to obtain smooth and fine surface finish.
• Utilizes a special MOSFET electrical discharge circuit design for rapid speed finishing and reduced electrode wear to enable mold surface polishing and prevent surface hardening.
• Optional mirror surface finishing system can be installed to achieve ultra-fine surface finishing of more than Ra0.2m.
  

Special KM180 / KM210 Servo Functions:

• Three-axis locations utilizes 1m optical measurement feedback for high precision positioning. The optical measurement resolution can be adjusted in gradations of 1m.
• Has unlimited sparking conditions and processing settings.
• Has a sparking period servo that supports the active utilization of finishing depth.
• Utilizes the most advanced 32-bit industrial-use high speed computer control offering powerful functions and easy operation with VGA TFT LCD display elegant and durable.
• Has metric and inch measurement unit as well as Chinese- and English-language switching functions.
• Optical measurement direction can be set or modified by internal code.
• Supports single-hole and multi-hole single-depth or multi-depth automatic fine finishing.
• Automatic edge scanning function to simplify the degree of difficulty.
• The x- and y-axis positioning is operable according to the absolute coordinates value or relative coordinates value inputting method.
• Four different selectable rates of manual operation to support incremental operation method , option MPG fanction easy for operator.
• Optional mirror surface finishing system can be installed to achieve ultra-fine surface finishing of more than Ra0.2m.

Specification	KM180	KM210
X-Travel and Setting Accuracy	1200 x 0.01 mm / 300 mm	2000 x 0.01 mm / 300 mm
Y-Travel and Setting Accuracy	700 x 0.01 mm / 300 mm	1000 x 0.01 mm / 300 mm
Z-Travel Setting Accuracy	450 x ±0.005 mm / 300 mm	600 x ±0.005 mm / 300 mm
Work Tank Dimension	2150 x 1150 x 700 mm	2900 x 1500 x 700 mm
Table Dimension	1400 x 900 mm	2240 x 1050 mm
Maximum Table-Quill Distance	1100 mm	1150 mm
Maximum Electrode Weight	400 kgs	500 kgs
Maximum Table Loading	8000 kgs	9000 kgs
Nominal Current	60A / 5A, 90A / 5A, 120A / 5A	60A / 5A, 90A / 5A, 120A / 5A
Input Voltage	220 / 380 / 415 / 440 V	220 / 380 / 415 / 440 V
Connected Rating	7 KVA / 10 KVA / 13 KVA	7 KVA / 10 KVA / 13 KVA
Maximum Stock Removal Rate	400 / 600 / 800mm3 / min	400 / 600 / 800mm3 / min
Best Surface Roughness	Ra 0.2m	Ra 0.2m
Best Electrode Wearing Rate	<0.1 %	<0.1 %
Dielectric Tank Capacity	2000 liter	4000 liter
Filters	6 pcs	6 pcs
Machine Weight	7500 + 500 kgs	13000 + 700 kgs

Relative Product :

• HOME > EDM Machine > EDM Machine > NC Serial EDM Machine > K50 / K60
• HOME > EDM Machine > EDM Machine > NC Serial EDM Machine > K50 / K60 (CE)
• HOME > EDM Machine > EDM Machine > NC Serial EDM Machine > K90 (CE Available)