HOME > EDM Machine > EDM Machine > ZNC Serial EDM Machine > T50 / T60

Picture of ZNC Serial EDM Machine for Model No T50 / T60

Mechanical Features of This Series:

  • Machine head servo utilizes a special bearing design for stability, zero interval and load rate twice as high as conventional units.
  • Dielectric fluid nozzles built in machine head that efficiently removes debris, saves time and is convenient.
  • Friction-resistant PC thin-layer contact-sensitive board for attractive appearance, dust-resistance and longer service life.
  • Precision interior servo housing design, using PCB design for extended service life, safe operation and easy maintenance.

Basic Functions:

  • Innovatively equipped with three types of safety devices, has an infrared fire monitor, oil temperature monitor, automatic fire extinguisher and many other safety design features to provide absolute distancing from flames.
  • Has special capabilities for hole depth, blind hole, lateral Surface and large area electrode finishing.
  • Has an automatic sparking off time adjustment to prevent carbon accumulation and electrode wear.
  • High sensitivity PWM servo drive and sparking gap control to obtain smooth and fine surface finish.
  • Utilizes a special MOSFET electrical discharge circuit design for rapid speed finishing and reduced electrode wear to enable mold surface polishing and prevent surface hardening.

Special T50 / T60 Servo Functions:

  • Three-axis locations utilizes optical measurement feedback for high precision positioning. The optical measurement resolution can be adjusted in gradations of 1m or 5m.
  • Has unlimited sparking conditions and processing settings.
  • Has a sparking period servo that supports the active utilization of finishing depth.
  • Utilizes the most advanced 32-bit industrial-use high speed computer control offering powerful functions and easy operation.
  • Has metric and inch measurement unit as well as Chinese and English language switching functions.
  • Optical measurement direction can be set or modified by internal code.
  • Supports single-hole and multi-hole single-depth or multi-depth automatic fine finishing without requiring program re-write or utilizing programmable multiple depth auto fine finishing.
  • Optional mirror surface finishing system can be installed to achieve ultra-fine surface finishing of more than Ra0.2m.
Standard Accessories:Additional Equipment:
Precision Electrode Clamps
Piezoelectric Light
Work Fastening Tool Kit
Magnetic Induction Oil Nozzle Base
Operations Manual
"Erowa" Chuck-Swiss
3R System Chuck-Swedish
Di-Electric Cooler
Electric Oil
Permanent Magnetic Chuck
M.F.D (Fine Mirror Finish)

Specification
T50
T60
X-Travel and Setting Accuracy300 mm x 0.01 mm400 mm x 0.01 mm
Y-Travel and Setting Accuracy200 mm x 0.01 mm300 mm x 0.01 mm
Z-Travel and Setting Accuracy200 mm x ± 0.004 mm200 mm x ± 0.004 mm
Backslide Travel and Setting Accuracy190 mm x 0.01 mm190 mm x 0.01 mm
Work Tank Dimension870 x 510 x 320 mm1090 x 580 x 360 mm
Table Dimension600 x 360 mm660 x 380 mm
Maximum Table-Quill Distance600 mm600 mm
Maximum Electrode Weight90 kgs120 kgs
Maximum Table Loading 800 kgs1000 kgs
Nominal Current30A / 5A, 45A / 5A,
60A / 5A
30A / 5A, 45A / 5A,
60A / 5A
Input Voltage220 / 380 / 415 / 440 V220 / 380 / 415 / 440 V
Connected Rating4 KVA / 5.5 KVA / 7 KVA4 KVA / 5.5 KVA / 7 KVA
Maximum Stock Removal Rate200 / 300 / 400 mm3 / min200 / 300 / 400 mm3 / min
Best Surface Roughness Ra 0.2m Ra 0.2m
Best Electrode Wearing Rate<0.2 %<0.2 %
Dielectric Tank Capacity200 liter400 liter
Filters2 pcs3 pcs
Machine Weight1400 kgs1650 kgs